Difference between revisions of "Xenserver Alt1"

From Dacentec
Jump to: navigation, search
(Created page with "Hello! Welcome to the beginning of the tutorial (how-to) Series Virtual Tapioca. In this first post I will be teaching you how to create a repository (ISO images from CD / D...")
 
(No difference)

Latest revision as of 13:26, 5 August 2014

Hello!

Welcome to the beginning of the tutorial (how-to) Series Virtual Tapioca. In this first post I will be teaching you how to create a repository (ISO images from CD / DVD) in local disk (HD in which the system was installed XenServer) Linux template using the "Demo Linux VM", which is in a Debian Linux system customziado by Citrix and with paravirtualized drivers (xentools) already installed.

This environment is the use of 2 hosts and 10 VMs. The VM used to host the disks will have 384MB of RAM and 20GB disk for images (. Iso) CD / DVD used in the virtual environment.

Here we go!


1 - If the servers are in a "pool" select this, otherwise click on the Host Server (Physical), then "New VM"

Ctx xs howto iso server01 thumb.jpg

2 - Select Template "Demos Linux VM"

Ctx xs howto iso server02 thumb.jpg

3 - Enter the display name for the VM and (optional) a description

Ctx xs howto iso server03 thumb.jpg

4 - If you are in a "pool" select Host where the VM is hosted. Remember, it is mandatory for this VM it is tied to the Host in which we store the images to DVD / CD. If you have a Storage and want to use this, feel free!

Ctx xs howto iso server04 thumb.jpg

5 - Let qtade of vCPUs as "'1", but in the field we will use the value Memory 384MB.

Ctx xs howto iso server05 thumb.jpg

6 - Click on the first virtual hard disk (VHD), then "Properties" and change the size to 20480MB (20GB =)

Ctx xs howto iso server07 thumb.jpg

7 - Enter the virtual network interface (VIF). In this case it is about 2 physical network adapters in "Bond".

Ctx xs howto iso server09 thumb.jpg

8 - Click the "Finish" button and wait for the VM start

Ctx xs howto iso server10 thumb.jpg

9 - Fill in the requested data (root password and password vnc) conform below.

Ctx xs howto iso server11 thumb.jpg

10 - If there is a DHCP Server in a VM Network won an IP in this example the address is "172.16.10.217"

Ctx xs howto iso server12 thumb.jpg

11 - To prevent problems with changing the IP address we will change the configuration file "/ etc / network / interfaces". Use the command "cat / etc / network / interfaces" to display the contents of the file without modifying it. See the line "iface eth0 inet dhcp". She says eth0 (the 1st. Detected by the system board network) are using DHCP.

Ctx xs howto iso server13 thumb.jpg

12 - Create a backup of the file interfaces (line 1). Then we will use the editor * nano * to change the content (line 2)

Ctx xs howto iso server14 thumb.jpg

13 - Fill in the file as shown below, where: address

iface eth0 inet static XXXX IP address that will be used x.x.x.x netmask Subnet Mask used x.x.x.x Gateway gateway network dns-nameservers x.x.x.x address DNS Server

Ctx xs howto iso server15 thumb.jpg

14 - After completing the data press "Ctrl + X" to exit and "Y" to save the content. After editing the file we will go and start the network card with the command "ifdown eth0" then "ifup eth0". To check if it worked type "ifconfig"

Ctx xs howto iso server16 thumb.jpg

15 - Now with the configured network will update the repository packages with "apt-get update" command and install the necessary to share the ISOs (need Internet connection) packets. In the linux world is used "Samba" to share files with Windows machines. As with the ISO Storage we will use the CIFS will need to install the samba package with "apt-get install samba" command (pressing Y)

Ctx xs howto iso server17 thumb.jpg

16 - At this point we will create the directory where we will store images of CD / DVD. In this example we will save them in the system root directory called "ISO".

s-in-1 :/ # mkdir ISOS

17 - Alright! With the directory created will set up the system by editing the smb.conf file with the command

nano /etc/samba.smb.conf

18 - Change the workgroup name as your domain (example: minhaempresa.local) but without the "local.".

Ctx xs howto iso server18 thumb.jpg

19 - Insert the contents of the table at the end of smb.conf [ISOS] comment = ISOs path = / ISOS browseable = yes

Ctx xs howto iso server19 thumb.jpg

20 - After filling the data is saved and with "Ctrl + x" and then "Y". Done that restart the Samba service with the command ./etc/init.d/samba restart

21 - That we may access this directory via XenServer is necessary to create a user. In the example we'll create one called "xenserver" 2 with the following commands:

useradd xenserver smbpasswd-a xenserver

22 - Done (all of it) will set up in the XenCenter Storage ISO. For this we will click on "New Storage" and choose "Windows File Sharing" option in "ISO Library."

Ctx xs howto iso server20 thumb.jpg

23 - In the name field put the descriptive Storage (I suggest something that indicates that it is a repository of ISO images). "Share Name" put the address + share. In our case the IP is 172.16.10.30 and the share name is "iso".

\\172.16.10.30\isos

Ctx xs howto iso server21 thumb.jpg

24 - Ready! We can now access our ISO repository and check by XenCenter all ISOs that we share:

Ctx xs howto iso server22 thumb.jpg

Okay, any questions we are available